DIY: Cassette Case

DIY: Cassette Case

 

For a cartridge case you need: Old cassette, superglue and a zipper.

 First you have to unscrew the cartridge and get out the insides. We then have two simple plastic covers in front of him.

The shot glass, which are marked with arrows cancel.

Then cut the zipper to the right length to (once the cassette drumherrum).

Now glued to the edge of the plastic bag to the outermost edge of the zipper. This works best if you look vorarbeitet page by page and has opened the zipper.

The same is done with the other half of the cassette.

When you're done, the whole looks like this :)

 

Finally, you should still at the end of the zipper (if you cut off a piece) dab some glue to get out of the slide can not go smoothly.

My finished result :) It fit inside a good three Labello, but other little things go well in the bag stowed;) So nothing falls out of the holes, I glued a little film about it.