Angel And Demon Wings Pendant

 

You Will Need

• 20 gauge Wire
• 28 gauge Wire
• Pliers
• Necklace Chain

---

Cost

Almost Nothing

1. 1
   For how to make the angel wing, see my other project Celtic Butterfly Pendant.
   
2. 2
   Begin by grabbing your thicker black wire and using your angel wing as a guide to for shaping the top and bottom loops.
   
3. 3
   Curve the wire up so that it goes along the right edge of the wing.
   
4. 4
   Bend the wire back like so to shape the first finger (literally what they're called for bat wings, according to my brief google search...). Notice where it is bent relative to the angel wing behind it.
   
5. 5
   Create a small loop/bulge to mark the end of the finger. Notice that the loop is a bit farther out that the bottom most finger.
   
6. 6
   Curve the wire up so that it goes along the right edge of the wing.
   
7. 7
   Bend the wire back again to create another finger, and add a loop to mark the end of the finger. Again, the loop is a bit farther out than the loop below it.
   
8. 8
   Curve the wire back up so that it goes along the right edge of the wing.
   
9. 9
   Bend the wire back yet again to create another finger, and add a loop to mark the end of the finger. This time, the loop is a lot farther out than the loop below it.
   Cut the wire short after you curve the wire back up so that it goes along the right edge of the wing.
   
10. 10
    Curl the cut end into a small loop.
    
11. 11
    For the webbing, you'll need the thinner black wire. Attach one end to the smallest finger.
    
12. 12
    Begin wrapping the wire around each finger.
    
13. 13
    Continue..
    Make sure that the thin wire in between fingers is a bit curved inward
    
14. 14
    Wrap around the last finger and cut the wire before using pliers to clamp the cut edge as close to the rest of the wings as possible.
    
15. 15
    Using the same method, add another layer of webbing.
    
16. 16
    Add yet another layer to finally complete the demon wing!
    
17. 17
    Use your thinner black and silver wires to attach the two wings together.
    
18. 18
    To transform this into a pendant, simply slip a jump ring through a loop and add a necklace chain.
    There you have it -- a pair of wings to adorn your neck (or to present to the friend who inspired the bookmark idea in the first place; I hope she likes it!)